Pellon® 986F Lightweight Fusible Fleece is a one-sided fusible fleece
that adds a layer of softness, body, and stability to home decorating,
craft and apparel sewing. No Pinning! No Basting! No Sewing! Can be
fused to fabric, cardboard, or wood. It is completely sewing machine
safe.
Note: Always pre-test with a swatch of your fabric prior to
use to make sure it is compatible with the fusible. It is recommended
to pre-wash all fabrics to remove any coatings that might interfere with
the fusible. Do not use fabric softener.
Most of our products
have either a dot adhesive or a spray adhesive. The dot adhesive is on
the rough side, where you can usually see the dot. The spray adhesive
is the shiny side. When in doubt, take a small sample and test it
covering both sides with a paper towel or fabric so you can ensure that
you do not make any fusing mistakes.
Directions for Use:
1. Cut Lightweight Fusible Fleece to desired size.
2. Place on ironing surface with fusible side up. Place fabric on top of fleece with right side up.
3.
To fuse, press firmly in place for approximately 10 seconds. Repeat,
lifting and slightly overlapping iron until all interfacing is fused.
Let fabric cool, then check bond.
Tips:
-For a light bond:
With iron at Wool/Steam setting, iron fabric in place. For most
applications, this should hold the fleece for easy handling while the
project is stitched.
-For an extra-strong bond: Cover fleece and
fabric with a thin, damp press cloth. With the iron at Wool/Steam
setting press in place for 10-15 seconds. Repeat, overlapping iron until
entire area is fused.
-For additional loft, use more than one layer of fleece.
Fusible
Weight: Lightweight
Made of: 100% Polyester
Single Sided:
Washing/Drying Instructions: Machine wash finished project in warm water, on the delicate cycle. Tumble dry low or dry clean.
- Stoffbreite
- ca. 114 cm | 45''
- Hersteller / Verlag
- Vlieseline / Pellon
- Sprache Inhalt / Umverpackung
- Englisch
- Material
- 100% Polyester
